The 5-gallon bucket feeder is fine and all but it’s a little bit complicated. Adjust the 2″ washer height so each nudge allows some feed to drop but doesn’t cause a cascade.Tie the feeder to a tree so the can so deer find the can easy to bonk. ![]() Adjust the 2″ washer up and down until it’s an inch or so below the bucket hole.Set the bridge into the feeder then insert the rod up through the both holes and attach it with a nut and a washer.Use a nut and washer on either end of the can to attach it to the bottom of the rod.Assemble the hole blocking portion by threading onto the middle of the rod one nut, one 1/4″ washer, the 2″ washer, another 1/4″ washer, and then two nuts.Drill a 1/4″ hole into the coffee can or similar object.Nail or screw the 2″ sections vertically to the horizontal 10″ section to form a bridge.Drill a hole in the center of the wood a bit wider than the threaded rod (this will be the pivot point so it needs to be able to swing slightly).Cut the wood to fit inside the bottom of the bucket, slightly longer than 10″ long, and cut two 2″ sections off the rest of the wood. ![]() Drill a 1″ wide hole in the bottom of the bucket.When that object is bumped (such as by a deer) then the washer is moved out of the way and some feed falls to the ground! Materials That washer is connected to a large, light object. There’s a hole in the bucket’s bottom which is covered by a washer. If you’re like me, you have a few 5-gallon buckets banging around your garage, collecting nothing but dust. I’ve ordered them by expense, from the cheapest to the most expensive. Here are five different ways to make a deer feeder. Plus, you’ll have the satisfaction of making an effective tool with your own hands. Why not save money and get a bigger feeder capacity by building your own? You’re already building your own deer blind, right?Ī homemade deer feeder can be as simple (or complicated!) as you want. However, there are several reasons why you may want to make your own DIY deer feeder.Ĭhances are good that you’ll be able to make your own deer feeder cheaper than one you have to buy, especially once you take gas or shipping fees into account. Put up a game camera (or save money by scouting in person) and you’ll be able to learn when they come by!Īlso, supplementing your local buck’s nutrition can help them grow larger antlers ! The goal isn’t to make the deer so fat they can’t wander away, but rather to get them used to visiting an area you can easily hunt. ![]() Why fork out for an expensive deer feeder when you can save that money on more essential hunting gear?Īnd how do you build one yourself, anyway? Why Make a DIY Deer Feeder?įeeding deer is a popular way to attract wildlife to your property for an easier hunting experience. The solution may come in the form of a homemade deer feeder. In fact, depending on your local laws, it’s a bad idea to (get caught as you) feed deer on your property!īut deer feeding adds a lot of extra expense to your already-limited hunting budget. Whether it’s hunting season or not, today may be the day to start attracting deer to your property. For some light reading, check out our affiliate disclosure. Buying something through these links doesn't cost you anything and helps support Know Prepare Survive.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |